Bare wire primary harnesses are designed to plug into your vehicle's factory wiring and give you bare ended wires at the other end . Bare wires allow you to "hard wire" your head unit directly in using the bare ended wiring harness that comes with your aftermarket stereo. The wires are colour coded for easy cable identification.

AP7350 Vehicle specific plug to bare wire harness to suit Hyundai & Kia - various models

Description:

This Aerpro Harness plugs into your Hyundai Elantra, Getz, Santa Fe, Sonata, Tiburon; Kia Carnival, Optima, Rio, Cerato (Sedan) and Cerato factory headunit wiring system. Allowing for the installation of an aftermarket headunit without the need to remove the factory plug from the vehicle, AP7350 provides colour-coded bare end wires to match standard aftermarket radio wiring looms. Simply match the wire colours between the AP7350 and your aftermarket headunit wiring loom (supplied with the aftermarket headunit) and hard-wire them together. To hard-wire we recommend using a soldering iron and solder (sold separately) and ensure they are insulated correctly once connected.

Please Note: Harnesses vary between vehicles, please use the Aerpro Vehicle Selector to identify the correct harness for your application

Features:

Connects to vehicle's factory wiring, providing bare end wires
No need to remove the factory stereo plug from the vehicle
Colour coded wires to match standard aftermarket headunit wiring loom for simple identification and easy installation
Simply match the colours from this harness to the aftermarket headunit harness and hard-wire (solder) them together
Solder (or crimps) and heat shrink (or insulation tape) required for installation, not included

Specs:

PLUG TYPE:
- 1 x 14 PIN
INSTALLATION TYPE: BARE WIRE, REQUIRES SOLDERING
NOTES:
- Alternatively, Aerpro APP085 can be used which converts the vehicle plug to ISO connector system

Vehicles known to work with this product:

Hyundai Elantra 2000-2005 XD