Universal ISO connecters and extension cables will suit European cars and any of our other ISO harnesses. Universal Steering Wheel Control Adapters are programmable to most vehicles.

AXSWC Universal steering wheel control interface

Description:

The AXSWC by Axxess Interface is a universal steering wheel control interface that allows steering wheel controls to be retained in various vehicles when upgrading to an aftermarket radio. The AXSWC has the ability to auto detect many vehicle makes and aftermarket radios and it will pre-set the steering wheel controls to the aftermarket radio automatically so no programming is required. It also has the ability to be manually programmed to suit vehicles not compatible with the auto detection feature. The AXSWC is not a plug and play interface, it requires installation and it is recommended that wires are soldered for the best connection.

Features:

Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
One Interface does it all, no additional interfaces needed
Designed to be compatible with all major radio brands
Auto detects (1) vehicle type, radio connection, and presets controls
Ability to dual assign steering wheel control buttons
Can be manually programmed for most vehicles
Retains settings even after battery disconnection or interface removal
All connections done at the radio location
Requires installation and it is recommended that wires are soldered for the best connection
Micro USB updatable

Specs:

INSTALLATION TYPE: HARD WIRE (SOLDERING RECOMMENDED)
VEHICLE COMPATABILITY: UNIVERSAL (SUITS VARIOUS VEHICLES)
HEADUNIT COMPATABILITY: MOST MAJOR BRANDS OF AFTERMARKET HEADUNITS
INCLUSIONS:
- AXSWC INTERFACE
- AXSWC HARNESS (12 PIN HARNESS WITH MALE 3.5MM JACK)
- 3.5MM ADAPTOR
NOTE:
- Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition.