These adaptors allow you to install an aftermarket amplifier to your factory head unit. These devices take the speaker level outputs from the head unit and reduce the signal to a level of which an aftermarket amplifier can use without overloading its inputs.
IRAD Wavtech ignition / remote generator with delay function
Description:
The IRAD provides solutions to three very specific problems faced in todays car audio installations. This easy to program device allows you to add a switched 12 volt output, a remote output with adjustable delay and a relay/solenoid control to overcome the issues created by vehicles with start/stop systems.
Features:
- Automatic 12V ignition detection and +12V output generation
- Generated +12V remote output (direct or linked to IGN)
- Stop-start relay/solenoid control mode
- Independent adjustable IGN & REM turn-on/off delays
- >750mA continuous current per output
- Compact aluminium chassis with detachable mounting tabs
- Locking detachable terminals
Specs:
- OPERATING VOLTAGE: 6V-18V
- IGNITION DETECT THRESHOLD: >0.5V B+ CHANGE
- REMOTE IN TRIGGER: >6V
- IGNITION OUT:
- VOLTAGE: >1V FROM B+
- CONTINUOUS CURRENT: 750mA
- PEAK CURRENT: <1.5A
- REMOTE OUT:
- VOLTAGE: >1V FROM B+
- CONTINUOUS CURRENT: 750mA
- PEAK CURRENT: <1.5A
- IGNITION REMOTE MODE:
- IGNITION OUT DELAY: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-10MIN, 1MIN STEPS (0 DEFAULT)
- REMOTE OUT DELAY: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-5SEC, 1SEC STEPS (0 DEFAULT)
- RELAY CONTROL MODE:
- IGNITION OUT: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-10MIN, 1MIN STEPS (3MIN DEFAULT)
- REMOTE OUT: TURN-ON: N/A (BY ENGINE OFF DETECT) / TURN-OFF: N/A (SAME AS IGNITION OUT)
- CURRENT DRAW:
- MAX: <1.6A (CONT.)
- IDLE: <2.6MA
- DIMENSIONS:
- CHASSIS ONLY: 20x38x37.7mm
- INCLUDING TABS: 22x38x61mm
Weight:
0.10KG